- USDT(TRC-20)
- $0.0
To lift weights at home, first you need the weights. Thatâs simple enoughâif youâre into barbell lifts, just buy a barbell set.
But your next problem is figuring out how you squat. Squatting typically involves a squat rack, and thatâs a luxury many home gymmers donât have. THat doesn't mean you have to forgo squatting altogether though. Letâs look at your options.
Bumper Plate Olympic Weight Plate High Bounce Bumper Weight Plate with Steel Insert Strength Training Weight Lifting Plate
$399.99
Shop Now
Shop Now
$399.99
Before I get into it, note that none of the options I'll be discussing include safeties, which a real squat rack would have. Thatâs okay, because they all assume that you are either working with light enough weights that you wonât fail your lift, or that you know how to bail out by dumping the weight if you canât complete the rep. This is a learnable skill, and it wonât damage your equipment if you use bumper platesâkeep that in mind if youâre living the no-rack life.
A solid squat rack is an investment, so I understand not wanting to splurge on one right away. (Heck, my own pandemic home gym went without a squat rack for about a yearânot because I decided against one, but because it didnât occur to me that a squat rack might be affordable or feasible in my small garage.)
The truth is, supports for squatting arenât nearly as expensive as you might think. You can order a pair of lightweight but strong squat stands like these for $50 to $60, or make your own out of concrete and 2x4s. I've gone on the record saying a good squat rack is worth the investment, but I also believe that makeshift stands like these are an excellent stopgap if you arenât ready to take that step.
Roll over image to zoom in F2C Max Load 550Lbs Pair of Adjustable 40"-66" Squat Rack Sturdy Steel Squat Barbell Free Bench Press Stands GYM/Home Gym Portable Dumbbell Racks Stands (one pair/two pcs)
$58.99
$92.99 Save $34.00
Get Deal
Get Deal
$58.99
$92.99 Save $34.00
Pros: Cheap, lightweight, can move out of the way for storage. The only limit to the amount of weight you can squat this way is the limit of the equipment
Cons: Not free. You also donât get to learn any strange new skills, like the options below.
Olympic lifters and Crossfitters will probably be most comfortable with this option: Instead of squatting with the bar on your back, clean the bar into a front rack position. That means you grab it while itâs on the ground, launch it upwards, and catch it on your shoulders, just in front of your neck.
The ending position of a clean is the same as the starting position for front squats, so you can then do as many reps of front squats as you like.
The main problem with this approach is that if you arenât a weightlifter or Crossfitter, you probably arenât very good at cleans. It takes time, practice, and ideally some good coaching to get efficient enough at cleans to be able to handle a realistic weight for front squats. If youâre committed to lifting without a squat rack, this is a skill worth learning. Otherwise, you might want to check out the other options.
Pros: Easy if you know how to do it. Lets you make the most of a small amount of weight (front squats are harder than back squats at the same weight).
Cons: Requires you to be pretty good at cleans. Also, this doesnât give you a way to do heavy back squats.
The zercher is often seen as esotericâan odd lift only done by odd people. But itâs actually a solid option for squats, whether or not you have a rack available. Sometimes called a âlow bar front squat,â it lets you go a lot heavier than a regular front squat, but you donât need to know how to clean a barbell to get the weight into position.
How to do zercher squats:
If your first thought is âow, that would hurt my elbows,â well, youâre rightâat first. Turns out the elbows adapt; people who zercher squat regularly find that itâs not really a problem. You can always wrap the bar in a towel or barbell pad, or wear elbow sleeves for extra cushioning. If I havenât zerchered in a while, Iâll sometimes wear a sweatshirt and slip my knee sleeves over my elbows. Anyway, you get used to it.
Pros: Free. No special skills required. Heavy weights are possible. You get to do a deadlift with every set.
Cons: Elbows might hurt. You have to do a deadlift with every set.
Alright, now this one is an odd lift for odd people. You could become one of those people, though.
To do tit, youâll need a clear space around you, non-slip flooring, and just enough bravery and stupidity to think âsure, what the hell, I probably wonât die.â (It will not surprise readers to hear that I check all three boxes, and thus have gone on to set a national record in my weight class in this lift.)
To be fair, itâs not as dangerous as it looks. You do need a little bit of practice to know how to stabilize the bar and center yourself underneath it, but I found it easier to learn than the Olympic clean discussed above. Would this be my first pick for somebody who wants to squat and doesnât have a squat rack? No. But is it a viable option for a person who thinks itâs cool? Absolutely.
Pros: Free. Heavy weights are possible. Impress your friends, scare your neighbors.
Cons: Requires plenty of space and nerves of steel. Scares your neighbors.
The following things are not replacements for barbell squats, in my opinion:
The following are exercises that arenât the same as normal barbell squats, but theyâll still build strong legs and are worth considering as you explore your options.
Iâd also like to give an honorable mention to Arthur lifts. This is where you hack lift the bar until you can get it onto your lower back, then bounce it up to your shoulders. From there, you can squat it normally. Honestly, this only didnât make the main list because I donât personally like it. I consider it more painful than a Zercher and scarier than a Steinborn. But if you are intrepid enough to try it, knock yourself out.
Full story here:
But your next problem is figuring out how you squat. Squatting typically involves a squat rack, and thatâs a luxury many home gymmers donât have. THat doesn't mean you have to forgo squatting altogether though. Letâs look at your options.
Bumper Plate Olympic Weight Plate High Bounce Bumper Weight Plate with Steel Insert Strength Training Weight Lifting Plate
$399.99
Shop Now
Shop Now
$399.99
Before I get into it, note that none of the options I'll be discussing include safeties, which a real squat rack would have. Thatâs okay, because they all assume that you are either working with light enough weights that you wonât fail your lift, or that you know how to bail out by dumping the weight if you canât complete the rep. This is a learnable skill, and it wonât damage your equipment if you use bumper platesâkeep that in mind if youâre living the no-rack life.
Get squat stands instead of a rack
A solid squat rack is an investment, so I understand not wanting to splurge on one right away. (Heck, my own pandemic home gym went without a squat rack for about a yearânot because I decided against one, but because it didnât occur to me that a squat rack might be affordable or feasible in my small garage.)
The truth is, supports for squatting arenât nearly as expensive as you might think. You can order a pair of lightweight but strong squat stands like these for $50 to $60, or make your own out of concrete and 2x4s. I've gone on the record saying a good squat rack is worth the investment, but I also believe that makeshift stands like these are an excellent stopgap if you arenât ready to take that step.
Roll over image to zoom in F2C Max Load 550Lbs Pair of Adjustable 40"-66" Squat Rack Sturdy Steel Squat Barbell Free Bench Press Stands GYM/Home Gym Portable Dumbbell Racks Stands (one pair/two pcs)
$58.99
$92.99 Save $34.00
Get Deal
Get Deal
$58.99
$92.99 Save $34.00
Pros: Cheap, lightweight, can move out of the way for storage. The only limit to the amount of weight you can squat this way is the limit of the equipment
Cons: Not free. You also donât get to learn any strange new skills, like the options below.
Clean the weight and do front squats
Olympic lifters and Crossfitters will probably be most comfortable with this option: Instead of squatting with the bar on your back, clean the bar into a front rack position. That means you grab it while itâs on the ground, launch it upwards, and catch it on your shoulders, just in front of your neck.
The ending position of a clean is the same as the starting position for front squats, so you can then do as many reps of front squats as you like.
The main problem with this approach is that if you arenât a weightlifter or Crossfitter, you probably arenât very good at cleans. It takes time, practice, and ideally some good coaching to get efficient enough at cleans to be able to handle a realistic weight for front squats. If youâre committed to lifting without a squat rack, this is a skill worth learning. Otherwise, you might want to check out the other options.
Pros: Easy if you know how to do it. Lets you make the most of a small amount of weight (front squats are harder than back squats at the same weight).
Cons: Requires you to be pretty good at cleans. Also, this doesnât give you a way to do heavy back squats.
Zercher squats
The zercher is often seen as esotericâan odd lift only done by odd people. But itâs actually a solid option for squats, whether or not you have a rack available. Sometimes called a âlow bar front squat,â it lets you go a lot heavier than a regular front squat, but you donât need to know how to clean a barbell to get the weight into position.
How to do zercher squats:
Stand in front of the bar with your feet wider than your arms (same idea as a sumo deadlift, but you donât have to get as wide as sumo deadlifters do).
Deadlift the bar.
Bend your knees so that youâre in a squatting position, and set the bar down into your lap.
One at a time, slip each arm between your legs and under the bar.
Now that the bar is in the crooks of your elbows, stand up. Youâve completed your first rep.
For subsequent reps, just bend and straighten your knees as you would in a normal squat. (No need to return the bar to the ground each rep, although you can if you want.)
If your first thought is âow, that would hurt my elbows,â well, youâre rightâat first. Turns out the elbows adapt; people who zercher squat regularly find that itâs not really a problem. You can always wrap the bar in a towel or barbell pad, or wear elbow sleeves for extra cushioning. If I havenât zerchered in a while, Iâll sometimes wear a sweatshirt and slip my knee sleeves over my elbows. Anyway, you get used to it.
Pros: Free. No special skills required. Heavy weights are possible. You get to do a deadlift with every set.
Cons: Elbows might hurt. You have to do a deadlift with every set.
Steinborn squats
Alright, now this one is an odd lift for odd people. You could become one of those people, though.
To do tit, youâll need a clear space around you, non-slip flooring, and just enough bravery and stupidity to think âsure, what the hell, I probably wonât die.â (It will not surprise readers to hear that I check all three boxes, and thus have gone on to set a national record in my weight class in this lift.)
To be fair, itâs not as dangerous as it looks. You do need a little bit of practice to know how to stabilize the bar and center yourself underneath it, but I found it easier to learn than the Olympic clean discussed above. Would this be my first pick for somebody who wants to squat and doesnât have a squat rack? No. But is it a viable option for a person who thinks itâs cool? Absolutely.
Pros: Free. Heavy weights are possible. Impress your friends, scare your neighbors.
Cons: Requires plenty of space and nerves of steel. Scares your neighbors.
Squat alternatives I donât recommend
The following things are not replacements for barbell squats, in my opinion:
Barbell hack lifts are behind-the-back deadlifts. They involve the quads a little more than a regular deadlift, but theyâre not squats.
Trap bar deadlifts, ditto. Great as a deadlift variation, but not a squat.
Goblet squats. These are a fine exercise, but if youâre strong enough to do barbell squats, goblets probably arenât going to cut it as a main lift.
Lifting the bar over your head and onto your back: If you can do this, the weight is too light for a heavy set of squats.
Not-quite-squat options that are still great
The following are exercises that arenât the same as normal barbell squats, but theyâll still build strong legs and are worth considering as you explore your options.
Bulgarian split squats: these can be done with lighter weights than regular squats, so dumbbells or a relatively light barbell can do the job.
Leg press machines, any kind (Iâm including the hack squat machine here). If your gym has a leg press but no squat rack, these would be my first pick for a squat replacement.
Pistol squats: I find these to be too hard on the knees to fully replace squats, but theyâll certainly give your legs a serious challenge.
Lunges and step-ups: This type of single leg work is always challenging to the quads, and doesnât require as much weight as two-legged squats.
Iâd also like to give an honorable mention to Arthur lifts. This is where you hack lift the bar until you can get it onto your lower back, then bounce it up to your shoulders. From there, you can squat it normally. Honestly, this only didnât make the main list because I donât personally like it. I consider it more painful than a Zercher and scarier than a Steinborn. But if you are intrepid enough to try it, knock yourself out.
Full story here: